SuperHeat Digital Teflon Milk Warmer

The new 240v SuperHeat Digital Milk Warmer is the latest advancement in milk warmers. The innovative temperature sensor now measures liquid temperature at its coldest point - close to the base. This means the liquid reaches pre-set temperature quickly and more accurately and makes continuous heating possible without timing. 

The teflon coated 2300W element is now in a conical shape which heats the liquid faster by promoting greater circulation. As warm liquid rises, and cool liquid falls the circulation is accelerated by the constricted flow area of the cone shape. 

Select one of two heating programs with the touch of a button on the illuminated display: one button for large volumes and one button for smaller volumes of less than 9 litres. The SuperHeat will store your preferred temperature setting (from 10-90 degrees Celsius) even when unplugged. This ensures your calves receive a precise and consistent temperature each feed. 

The red check light indicates that the milk warmer is in heating mode, once set temperature is reached the element switches off and the red check light extinguishes, the achieved target temperature then flashes on the display and six audible beeps can be heard indicating that the milk is now ready. (Note: residual heat from the element can cause the display temperature to differ immediately but will conform to target temperature after a short time). 

If the milk warmer is left in the container, the milk will be reheated again when the temperature drops to ensure the pre-set temperature is maintained. Safety cut-out feature in the event of dry operation. 

Maximum depth is 70cm. 

Patent pending. 

Clean after use by submerging or rinsing in cold water. Once cooled the element should be wiped clean with warm soapy water.