Ideal for home milking of house cows or early season cows. Full Stainless Steel frame with solid rubber wheels for easy movement. Collect milk comfortably with 25 L Stainless Steel bucket featuring a clear polycarbonate lid & Pneumatic 60/40 pulsator. Milking of up to 12 cows per hour possible with large 220 L rotary vacuum pump.
These milking machines are ideal for collecting milk from the house cow or those early cows when you don’t want to start the shed for only a 2-3 animals. Available as a single or two cow configuration. Full Stainless Steel frame with handy solid rubber wheels for easy portability. Stainless Steel collection bucket features a clear polycarbonate lid for easy viewing and easier cleaning through the 19cm-diameter neck. Pneumatic 60/40 pulsator and large 220L rotary vacuum pump allows milking up to 12 cows per hour (1 cow unit). Powered by a single phase 1.5hp 10amp electric motor these machines don’t require large power supplies for use. Knock up a small Tie Stall and start milking. Rotary vacuum pump oil required before use, not supplied. Spare short air tubes and teat cup stoppers supplied. Supplied with 2x 25L stainless steel herd test buckets (223749).
Available separately: Goat & Sheep Cluster (225184). NOTE: Stainless steel is known for its resistance to corrosion, but it is not completely immune to it. Caring for the frame of a stainless-steel milking machine is essential to ensure its longevity and prevent rust and corrosion. Here are some important tips to help you protect the frame of your milking machine:
Regular Cleaning: Clean the frame regularly with warm water and a mild detergent. Avoid abrasive or chlorine-based cleaners as they can damage the stainless-steel surface.
Thorough Rinse: After cleaning, make sure to rinse the frame thoroughly with clean water to remove any soap residue, which can promote corrosion.
Towel Dry: Use a clean, dry towel to wipe down the frame after rinsing. Moisture can contribute to the formation of rust, so it's important to keep the frame dry.
Avoid Harsh Chemicals: Avoid using harsh chemicals, acids, or bleach on the stainless-steel frame, as they can corrode the surface. Stick to mild cleaners specifically designed for stainless steel.
Protective Coatings: We HIGHLY RECOMMEND the application of a water dispersant and protective coating such as CRC, WD40 or any other application designed to treat and prevent rust. This will provide an additional layer of protection against corrosion.
Regular Inspection: Periodically inspect the frame for any signs of rust, discoloration, or pitting. Address any issues promptly to prevent them from worsening.
Avoid Abrasion: Be careful when moving equipment or cleaning around the milking machine. Avoid bumping or scraping the frame against hard objects, as this can damage the protective surface layer.
Ventilation: Ensure proper ventilation in the milking area to reduce humidity, which can contribute to corrosion. Adequate airflow helps keep the frame dry.
Lubricate Moving Parts: If your milking machine has moving parts on the frame, lubricate them as recommended by the manufacturer to prevent friction-induced wear and potential corrosion.
Store Indoors: Whenever possible, store the milking machine indoors or in a covered area when not in use to protect it from the elements.
Use Stainless Steel Hardware: When replacing or installing hardware on the frame, use stainless steel fasteners and components to maintain the corrosion-resistant properties of the frame.
By following these guidelines, you can help protect the frame of your stainless-steel milking machine from rust and corrosion, extending the life of your equipment.
